HVAC Service in Enumclaw, WA

No heat on a frosty Plateau morning? AC blowing warm air when the valley heats up? Hot/cold rooms, rising energy bills, or wood and wildfire smoke making it hard to breathe? I’m your local HVAC tech with Eatonville Heating and Cooling, and we’re close by and ready to fix it fast. From urgent repairs to new installs and seasonal tune-ups, we roll up with well-stocked trucks, upfront pricing, and the know-how to get your home comfortable again—safely and efficiently. Call or schedule now, and we’ll get you the next available service window.

 

Why homeowners in Enumclaw choose us

• Local, neighborly service across 98022 in the SE King County Foothills

• Technician-led diagnostics with options, clear pricing, and your approval before work starts

• We service all major brands of furnaces, heat pumps, AC, and IAQ equipment

• Parts on the truck to complete most repairs in a single visit

• Respect for your home: on-time arrival windows, shoe covers, clean work areas

• Experience with Enumclaw homes—farmhouses, shops/ADUs, manufactured homes, and newer builds

 

Heating services in Enumclaw, WA

Foothills nights run cold and damp—reliable heat isn’t optional. We work on gas, propane, and electric furnaces, high-efficiency heat pumps, and ductless mini-splits.

 

Heating repair

Call if you notice:

• No heat, intermittent heat, or short cycling

• Burning/electrical smells, buzzing, rattling, or grinding

• Cool air from vents, weak airflow, or uneven rooms

• Sudden spikes in gas or electric usage
   

What we check and fix:

• Safety and combustion checks, venting, flame sensors, high-limit switches

• Ignitors, inducer and blower motors, capacitors, relays, and control boards

• Heat exchanger integrity and flue performance to reduce CO risk

• Thermostat calibration and electrical tightening
   

You’ll get a clear diagnosis and good/better/best options to fit your budget and timing.

 

Heating installation and replacement

Upgrading an older furnace or going to a high-efficiency heat pump? We size and install it right—no guesswork.

• Room-by-room load calculations and airflow measurements

• Cold-climate heat pumps that hold capacity during Plateau cold snaps

• Duct sealing, repairs, and balancing for even comfort—great for older homes and shops

• Smart thermostats, zoning, and IAQ add-ons
   

We follow manufacturer specs and Washington code for safe, efficient performance.

 

Heating maintenance

A tuned system runs safer, lasts longer, and uses less energy.

• Combustion and safety checks; verify venting and gas pressure (furnace/LP)

• Refrigerant charge, defrost cycle, and reversing valve checks (heat pumps)

• Clean burners, flame sensor, and indoor/outdoor coils as needed

• Inspect/clean blower assembly; check belts and bearings

• Measure temperature rise/drop, static pressure, and airflow

• Tighten electrical connections; test capacitors and relays

• Filter check with MERV guidance tailored to smoke/pollen concerns

 

Cooling services in Enumclaw, WA

Late-spring and summer heat can come on quick—make sure your AC or heat pump is ready.

 

Cooling repair

Common problems we fix fast:

• The system runs but won’t cool, or the indoor coil is iced over

• Water around the furnace/air handler (clogged condensate)

• Breaker trips, short cycling, or won’t start

• Loud outdoor unit, fan not spinning, or warm air at vents
   

How we solve it:

• Pinpoint refrigerant leaks; replace failed capacitors/contactors; diagnose fan/compressor faults

• Clear and treat condensate drains; verify float switches

• Clean coils to improve heat transfer and reduce head pressure

• Verify thermostat and control operation

 

Cooling installation and replacement

Quiet, efficient cooling matched to your home and ductwork.

• Central AC or heat pump systems with correctly matched indoor coils

• Ductless mini-splits for shops, ADUs, and hard-to-cool rooms

• Attention to airflow, return sizing, and condensate management

• Low-noise, high-efficiency options to tame summer peaks
   

We’ll walk you through choices and deliver a clean, code-right install.

 

Cooling maintenance

Prevent breakdowns when you need cooling most.

• Clean and straighten the outdoor condenser fins

• Inspect blower wheel and indoor coil; clean as needed

• Confirm refrigerant charge; record superheat/subcool

• Test capacitors, contactors, and safety controls

• Clear/treat condensate lines; verify drain pan safety switch

• Check delta-T across the coil and overall system airflow

 

Indoor air quality (IAQ) solutions for Enumclaw homes

Between pasture dust, damp winters, woodstove smoke, and late-summer wildfire smoke, IAQ matters. We fix stale air, odors, humidity swings, and persistent dust.

 

IAQ installation

• High-MERV media filters and cabinet upgrades for better capture without choking airflow

• Whole-home air cleaners (electronic/HEPA) to reduce fine particles and smoke

• UV-C coil treatment to limit biological growth on the indoor coil

• Balanced ventilation with ERV/HRV to bring in fresh air while managing heat and moisture

• Humidity control: dehumidification in summer; humidification in winter, where appropriate

 

IAQ repair and service

• Replace UV lamps; clean EAC cells/electrodes; service air cleaner fans

• Duct sealing and balancing to curb dust infiltration and even out room temperatures

• Source-track moisture issues and persistent odors

 

IAQ maintenance

• Set the right filter schedule for your home, pets, and smoke/allergy sensitivities

• Inspect ductwork, plenums, and returns for leaks or microbial growth

• Verify ventilation rates and adjust controls seasonally

 

Our process

• Schedule: Call or book online. Choose a convenient appointment window; we’ll send reminders.

• Diagnose: We listen, inspect, and pinpoint the cause—not just the symptom.

• Options: Clear repair/replace paths with transparent pricing—no surprises.

• Fix: We work clean and aim to complete most repairs in one visit.

• Verify: We test the operation, share readings, and explain what we did.

• Support: Maintenance tips and a written record of service.

 

Maintenance plans

Ask about seasonal maintenance to keep heating and cooling tuned year-round. Perks typically include priority scheduling, documented tune-ups for warranty compliance, and savings on repairs.

 

Common signs you need HVAC service

• The system runs nonstop, but can’t hit the set temperature

• Hot/cold spots, weak airflow, or noisy vents

• Musty, burning, or chemical smells from the system

• Frequent breaker trips or thermostat errors

• Utility bills are noticeably higher than last season
   

If you’re seeing any of these, schedule a diagnostic before it snowballs.

 

Equipment and brands we service

• Gas, propane, and electric furnaces; air handlers; heat pumps; and central AC

• Ductless mini-split systems (single- and multi-zone)

• Smart thermostats and zoning controls

• IAQ equipment: media filters, electronic air cleaners, UV lights, ERV/HRV

 

Safety-first, code-right

Every install and repair follows manufacturer specifications and Washington code. For combustion appliances, we verify venting, gas pressure, and safeties; for heat pumps and AC, we measure charge correctly and record readings.

 

Serving Enumclaw and nearby areas

We’re in the neighborhood daily—serving Enumclaw, Boise Creek, Krain, Osceola, and the Enumclaw Plateau, plus nearby Buckley, Black Diamond, Ravensdale, Lake Tapps, Bonney Lake, Greenwater along SR‑410, and South Prairie.

 

Ready for fast help?

Tell us what’s going on—no heat, no cool, new system, or air quality concerns—and we’ll get you on the schedule. The sooner we see it, the faster we can get your home comfortable again.

 

FAQ: HVAC service in Enumclaw, WA

• How often should I service my system?
  Twice a year: a heating tune-up in fall and a cooling/heat-pump tune-up in spring keep efficiency up and surprises down.

• Are heat pumps a good fit for Enumclaw’s climate?
  Yes. Modern heat pumps—including cold-climate models—heat efficiently through most Foothills winters and provide quiet, efficient cooling in summer. Many homes pair them with a furnace (dual fuel) for flexibility.

• Repair or replace—how do I decide?
  Consider age, repair history, comfort, efficiency, and safety. If a repair is more than a third of a new, efficient system and your unit is near the end of its life, replacement often wins in the long term.

• How often should I change my filter?
  Homes with pets or smoke/allergy concerns: check monthly and replace every 1–2 months. Otherwise, every 2–3 months is common. Media filters may go 3–6 months—follow cabinet and filter specs.

• What can I check before a tech arrives?
  Confirm thermostat settings, check the filter, make sure breakers/disconnects are on, and clear debris around the outdoor unit. If you smell gas or burning, exit and call for help.