HVAC Service in Tacoma, WA

No heat on a damp Tacoma morning? AC blowing warm air during a summer heat wave? Rooms that never feel right, rising utility bills, or wildfire smoke and dust making allergies flare up? I’m your local HVAC tech with Eatonville Heating and Cooling. We troubleshoot fast, show up with stocked trucks, and give you clear options to get your home comfortable again—safely and efficiently. Call or schedule now, and we’ll get you a convenient service window right away.

 

Why homeowners in Tacoma choose us

• Local, neighborly service across 98402–98409 and 98465–98467 in Pierce County

• Tech-first diagnostics with options, upfront pricing, and your approval before we start

• We work on all major brands of furnaces, heat pumps, AC, and IAQ equipment

• Parts on the truck to complete most repairs in a single visit

• Respect for your home: on-time arrival windows, floor protection, and clean work areas

• Experience with Tacoma housing—from historic Craftsman bungalows to modern condos

 

Heating services in Tacoma, WA

When Puget Sound air turns chilly and wet, dependable heat isn’t optional. We service gas and electric furnaces, high-efficiency heat pumps, and ductless mini-splits.

Heating repair
 

Call if you notice:

• No heat, intermittent heat, or short cycling

• Burning/electrical smells, buzzing, rattling, or grinding

• Cool air from vents, weak airflow, or uneven rooms

• Sudden spikes in gas or electric usage
   

What we check and fix:

• Safety/combustion checks, venting, flame sensors, high-limit switches

• Ignitors, inducer and blower motors, capacitors, relays, and control boards

• Heat exchanger integrity and flue performance to reduce CO risk

• Thermostat calibration and electrical tightening
   

You’ll see a clear diagnosis and repair options that fit your budget and timeline.

 

Heating installation and replacement

Upgrading a tired furnace or switching to a high-efficiency heat pump? We size and install it right—no guesswork.

• Proper load calculations and airflow measurements

• High-efficiency options for lower bills and quieter operation

• Duct sealing, repairs, and balancing for even comfort—great for older Tacoma homes

• Smart thermostat integration, zoning, and IAQ add-ons
   

Ask about cold-climate heat pumps that perform well through South Sound winters.

 

Heating maintenance

Tune-ups keep heat safe, efficient, and reliable.
 

Typical furnace/heat pump tune-up:

• Combustion, safeties, and venting checks (furnace)

• Refrigerant charge, defrost, and reversing valve checks (heat pumps)

• Clean burners, flame sensor, and indoor/outdoor coils as needed

• Inspect/clean blower assembly; check belts and bearings

• Verify temperature rise/drop, static pressure, and airflow

• Tighten electrical connections; test capacitors and relays

• Filter check with MERV guidance for your home and allergy needs

 

Cooling services in Tacoma, WA

Our warmer summers mean your AC or heat pump has to be ready when the heat hits.

Cooling repair
 

Common problems we fix fast:

• The system runs but won’t cool, or the indoor coil is iced over

• Water around the furnace/air handler (clogged condensate)

• Breaker trips, short cycling, or won’t start

• Loud outdoor unit, fan not spinning, or warm air at vents
   

How we solve it:

• Find refrigerant leaks; replace failed capacitors/contactors; diagnose fan/compressor faults

• Clear and treat condensate drains; verify float switches

• Clean coils to improve heat transfer and reduce head pressure

• Verify thermostat and control operation

 

Cooling installation and replacement

Quiet, efficient cooling matched to your home and ductwork.

• Central AC or heat pump systems with correctly matched indoor coils

• Ductless mini-splits for additions, ADUs, and hard-to-cool rooms

• Attention to airflow, return sizing, and condensate management

• Low-noise, high-efficiency options to handle summer peaks
  We’ll walk you through choices and deliver a clean, code-right install.

 

Cooling maintenance

Prevent breakdowns when you need cooling most.

• Clean and straighten the outdoor condenser fins

• Inspect blower wheel and indoor coil; clean as needed

• Confirm refrigerant charge; record superheat/subcool

• Test capacitors, contactors, and safety controls

• Clear/treat condensate lines; verify drain pan safety switch

• Check delta-T across the coil and overall system airflow

 

Indoor air quality (IAQ) solutions for Tacoma homes

Between port traffic, seasonal pollen, damp winters, and late-summer wildfire smoke, IAQ matters. We fix stale air, odors, humidity swings, and persistent dust.

 

IAQ installation

• High-MERV media filters and cabinet upgrades to boost capture without choking airflow

• Whole-home air cleaners (electronic/HEPA) to reduce fine particles and smoke

• UV-C coil treatment to limit biological growth on the indoor coil

• Balanced ventilation with ERV/HRV to bring in fresh air while managing heat and moisture

• Humidity control: dehumidification in summer; humidification in winter, where appropriate

 

IAQ repair and service

• Replace UV lamps; clean EAC cells/electrodes; service air cleaner fans

• Duct sealing and balancing to reduce dust infiltration and even out room temperatures

• Source-track moisture issues and persistent odors

 

IAQ maintenance

• Set the right filter schedule for your home, pets, and allergy needs

• Inspect ductwork, plenums, and returns for leaks or microbial growth

• Verify ventilation rates and adjust controls seasonally

 

Our process 

• Schedule: Call or book online. Choose a convenient appointment window; we’ll send reminders.

• Diagnose: We listen, inspect, and pinpoint the cause—not just the symptom.

• Options: Good/better/best solutions with transparent pricing—no surprises.

• Fix: We work clean and aim to complete most repairs in one visit.

• Verify: We test the operation, share readings, and explain what we did.

• Support: Maintenance tips and a written record of service.

 

Maintenance plans

Ask about seasonal maintenance to keep heating and cooling tuned year-round. Perks typically include priority scheduling, documented tune-ups for warranty compliance, and savings on repairs.

 

Common signs you need HVAC service

• The system runs nonstop, but can’t hit the set temperature

• Hot/cold spots, weak airflow, or noisy vents

• Musty, burning, or chemical smells from the system

• Frequent breaker trips or thermostat errors

• Utility bills are noticeably higher than last season
   

If you’re seeing any of these, schedule a diagnostic before it snowballs.

 

Equipment and brands we service

• Gas and electric furnaces, air handlers, heat pumps, and central AC

• Ductless mini-split systems (single- and multi-zone)

• Smart thermostats and zoning controls

• IAQ equipment: media filters, electronic air cleaners, UV lights, ERV/HRV

 

Safety-first, code-right

Every install and repair follows manufacturer specifications and Washington code. For combustion appliances, we verify venting, gas pressure, and safeties; for heat pumps and AC, we measure charge correctly and record readings.

 

Serving Tacoma and nearby areas

We’re in the neighborhood daily—serving Tacoma’s Stadium District, Proctor/North End, Old Town, Ruston/Point Defiance, Central Tacoma, Hilltop, Eastside, South Tacoma, Fern Hill, West End, Manitou, and Northeast Tacoma/Browns Point, plus nearby University Place, Fircrest, Lakewood, Fife, Parkland, and Midland.

 

Ready for fast help?

Tell us what’s going on—no heat, no cool, new system, or air quality concerns—and we’ll get you on the schedule. The sooner we see it, the faster we can get your home comfortable again.

 

FAQ: HVAC service in Tacoma, WA

• How often should I service my system?
  Twice a year: a heating tune-up in fall and a cooling/heat pump tune-up in spring keep efficiency up and surprises down.

• Are heat pumps a good fit for Tacoma?
  Yes. Modern heat pumps—including cold-climate models—heat efficiently through most of our winter and provide quiet, efficient cooling in summer. Many homes pair them with a furnace (dual fuel) for flexibility.

• Repair or replace—how do I decide?
  Consider age, repair history, comfort, efficiency, and safety. If a repair is more than a third of a new, efficient system and your unit is near end-of-life, replacement often wins long-term.

• How often should I change my filter?
  Homes with pets or allergy concerns: check monthly and replace every 1–2 months. Otherwise, every 2–3 months is common. Media filters may go 3–6 months—follow cabinet and filter specs.

• What can I check before a tech arrives?
  Confirm thermostat settings, check the filter, make sure breakers/disconnects are on, and clear debris around the outdoor unit. If you smell gas or burning, exit and call for help.